Motion Control – AMC’s µZ Plug-In Servo Drives available from Electromate!

Electromate offers Micro Z Plug-In Servo Drives from Advanced Motion Controls

Motion Control - Electromate-Logo

Vaughan, Ontario, Canada — Motion Control – µZ’s are the smallest off-the-shelf servo drives from ADVANCED Motion Controls. Pronounced ‘Micro-Z’ these plug-in drives are designed for embedded applications in a wide range of industries including: Robotics, Lab Automation, Homeland Security/Military, Electric Mobility, Medical and Packaging.

µZ servo drives are designed to drive brushless and brushed DC motors at a high switching frequency. To increase system reliability and to reduce cabling costs, the drives are designed for direct integration into your PCB. Weighing in at less than 9 grams, µZ Drives output 10A peak and 5A continuous and operate with a bus voltage range of 10-36VDC.

Designed without the need for a heatsink, the µZ’s are true featherweights with a high power to weight ratio. The µZ’s are fully protected against over-voltage, under-voltage, over-current, over-heating, and short-circuits. Depending on the model, the drives interface with digital controllers that have analog ±10V or PWM/Direction commands. These servo drives require only a single unregulated isolated DC power supply, and are fully RoHS (Reduction of Hazardous Substances) compliant.

Datasheets and Support:

AZB10A4 for ±10V Command Signals, Current Mode

AZBH10A4 for ±10V Command Signals, Hall Velocity Mode

AZBD10A4 for ±10V Command Signals, Duty Cycle Mode

AZBDC10A4 for PWM/Direction Command Signals

Stand-alone (drives with built-in interface)

AZB10A4IC for ±10V Command Signals, Current Mode

AZBDC10A4IC for PWM/Direction Command Signals

Additional features and benefits include:

  • Designed for direct board-to-board integration.
  • No heatsink and no need for additional heatsinking results in the smallest installed volume
  • Feather weight, less than 9 grams
  • Dimensions (mm) 38.1 x 38.1 x 7.34 for current mode models, 43.2 x 38.1 x 9.4 for velocity / duty cycle models
  • Dimensions (in) 1.50 x 1.50 x 0.29 for current mode models, 1.70 x 1.50 x 0.37 for velocity / duty cycle models
  • Large operational temperature range, 0-85°C
  • Compatible with low inductance motors
  • Smallest form factor of any off-the-shelf servo drive from ADVANCED Motion Controls
  • 40 kHz switching frequency

For further information on this new product or others in our extensive product portfolio, call 1-877-SERVO99 (737-8699) or e-mail Warren Osak at sales@electromate.comor visit Electromate at: www.electromate.com

Motion Control - Electromate-Logo
Visit our Website
Motion Control - Electromate Twitter Link
Motion Control - Electromate Facebook Link
You can leave a response, or trackback from your own site.
Powered by WordPress | Designed by: Free Premium WordPress Themes | Thanks to Free WP Themes, wordpress 4 themes and