Archive for the ‘Controller – Servo’ Category

Motion Control – COVID-19 … Important Information for Ventilator Manufacturers!

Motion Control – ATTENTION – Ventilator Manufacturers!           Vaughan, Ontario, Canada — Motion Control Components — COVID-19 has caused a significant shortage of ventilators for the most seriously ill patients. We are facing a global shortage of equipment and have precious little time to respond. Electromate is a mechanical ventilator component […]

Motion Control – Maxon drives are heading to the Red Planet with NASA’s Perseverance Rover!

Motion Control – Application – Maxon drives heading to the Red Planet! In July, NASA will be sending its fifth rover to Mars. Its main mission is to collect soil samples that will be analyzed on Earth at a later time. The rover will also carry a helicopter that will perform the first flights on […]

Motion Control – Linear Servo Controller Amplifier to Control Voice Coil Motors

Motion Control – Linear Servo Controller/Amplifier Forestville, CA,   —  Motion Control Components – The SCA814 Linear Servo Controller was specifically designed to control single phase, non-commutated devices like voice coil motors.  like it’s field proven predecessor the SCA754 is a high performance single axis DC motor controller and amplifier system.  It is comprised of a highly integrated single PC board […]

Motion Control – Integrated Motors Feature Fast and Easy Setup for Rockwell Automation/Allen-Bradley PLC’s!

Motion Control – Integrated Motors     Vaughan, Ontario, Canada — Motion Control Components — After the successful introduction of the complete range of ServoStep integrated motors JVL is now releasing Add-On-Instructions for fast and easy setup and programming in Rockwell Automation’s Studio 5000 software. All-in-one unit: Motor, Absolute multiturn encoder, Drive, Controller, PLC and […]

Motion Control – Maxon’s HPSC (High Performance Sensorless Control!)

Motion Control – Maxon’s HPSC (High Performance Sensorless Control!) Maxon motor introduces HPSC sensorless speed and torque with compact wiring and slim design Fall River, MA — Motion Control Components – Miniature – Maxon Motor has developed a sensorless speed and torque control solution called “HPSC”. This new technology allows FOC (field oriented control) for […]

Motion Control – Galil Programmable Motion Controller for Servo and Stepper Motors!

Galil’s DMC-4000 Series of Ethernet/RS232 Multi-Axis Motion Controllers set the standard for high performance and value Vaughan, Ontario, Canada — Motion Control Components — The DMC-40×0 motion controller is Galil’s highest performance, stand-alone motion controller. It belongs to Galil’s latest generation motion controller family, which accepts encoder inputs up to 22 MHz, provides servo update […]

Motion Control – Panel Mount Servo Drive Offers Centralized Control & High Bandwidth & Quick Response Times!

The AB25A100 PWM servo drive from Advanced Motion Controls is designed to drive brushless and brushed DC motors at a high switching frequency. Greenville, DE —-Motion Control Components – The drive is fully protected against overvoltage, under-voltage, over-current, over-heating and short-circuits across motor, ground and power leads. Furthermore, the drive can interface with digital controllers or be used stand-alone, […]

Motion Control – Low Cost, Highly Reliable Solenoid Control Modules Available from OES!

  Van Nuys, CA – — Motion Control Components– – Optimal Engineering Systems, Inc. (OES) offers seven types of advance solenoid control modules including: Pick-and-Hold Driver, Proportional (PWM) Driver, Closed Loop Solenoid Process Control, Pick-and-Drop, Load On-Off Power Cycling, Dual Proportional Valve Controller, and Serially Controlled Solenoid Driver modules. Applications of these compact modules measuring […]

Motion Control – Maxon’s New EPOS Programmable Smart Drive/Controller – “Positioning Made Easy” are Available from Electromate!

    Vaughan, Ontario, Canada — Motion Control Components — EPOS is a modular, digital positioning controller by maxon motor. It is suitable for controlling permanent magnet-activated motors with encoders in a range of 1 to 1050 W continuous output power. The wide range of operating modes, as well as various command interfaces, make it […]

Low Cost 4 Axis Servo Controller for High Speed, Low Inductance Motors Available from Moticont!

    Van Nuys, CA – Motion Control Components – The MOTI-1100 Series of Motion Controllers from Moticont is the latest generation of motion controllers. The MOTI-1100 Series controller incorporates a highly efficient PWM motor driver. The built-in PWM motor driver can drive motors with less than 1 mH of inductance without overheating the motor. […]

Powered by WordPress | Designed by: Free Premium WordPress Themes | Thanks to Free WP Themes, wordpress 4 themes and