Archive for the ‘Components’ Category

Motion Control – Highly Efficient 2 Way Traction Drives Reduce Motor Torque Ripple up to 84%!

North Babylon, NY – Motion Control Components – Rolling Motion Industries (RMI) has released two new traction drives. The MAR-17-2-2.1 Traction Drive and the MAR-23-2-2.1 Traction Drive. These highly efficient 2-Way gearless traction drives with only six moving parts use an engineered traction fluid with a coefficient of friction of just 0.1 to 0.12. The […]

Motion Control – IP65 Integrated Stepper Motors Available from Servo2Go!

Greenville, DE —-Motion Control – Applied Motion’s SWM integrated steppers are IP65 rated drive+motor units, fusing step motor and drive components into a single splashproof and dustproof device. This space-saving design eliminates wiring and saves on cost over conventional motor and drive solutions. The motion control SWM24 integrated steppers combine high torque NEMA 24 step […]

Motion Control – Compact and Precise Four Axes XY-Z Theta System!

    Philadelphia, PA, — Motion Control Components and Systems – The demand for a high accuracy, compact XYZR stages is met with IntelLIDrives technologies that address the unique needs of scanning microscopy, wafer and printed circuit board inspection, automated assembly and wide range of specimens and samples scanning in many types of imaging techniques […]

Motion Control – High Precision, Low Profile, Compact 100 mm Motorized Rotary Stage Available from OES!

  Van Nuys, CA – — Motion Control – Optimal Engineering Systems, Inc. (OES) now offers a high precision, low profile, compact motorized rotary stage, the AY110-100-SC. This precision stage is just 1.772 in. (45 mm) high and the foot print is only 4.764 in. by 6.693 in. (121 mm by 170 mm). The stage […]

Motion Control – Low Inertia, High Precision, Hollow Core Voice Coil Motor from Moticont!

  Van Nuys, CA – Motion Control Components – A low inertia hollow core voice coil or moving coil linear motor from Moticont, the HVCM-051-025-019-01, features high acceleration, precise positioning to less than one micron (0.00004 in.), high reliability, and low cost. This cleanroom friendly, non-commutated motor is available off-the-shelf. The HVCM-051-025-019-01 hollow core voice […]

Motion Control – Exor’s eX700 series features Harsh Environment Operation Is Available from Electromate!

  EXOR has taken the highly successful harsh environment eTOP500 series and updated it with the recently released eX700 series.  Vaughan, Ontario, Canada — Motion Control Components — This natural progression allows you to combine a high-performance sunlight readable display with state of the art connectivity such as OPC UA. eX700G Series combine high-performance sunlight-readable […]

The Engineering Edge – “New Design” Pillow Blocks from LM76!

When our customer, a major European manufacturer of machinery for the paper industry, informed us they were having failures with linear bearings in their robotic paper slicing system, we listened. As a robotic arm swings around (360 degrees) it slices the paper to length. After cutting the paper to length, a linear table below indexes […]

Motion Control – ENX 16 RIO Encoder from Maxon Motor!

Motion Control – Maxon Motor presents a top-of-the-range high-resolution encoder. The ENX 16 RIO offers an impressive resolution of up to 65,536 counts per turn in a compact and rugged housing.   Fall River, MA –Motion Control Components – Miniature Encoders – Requirements on encoders are becoming more and more demanding. This applies particularly to […]

Motion Control – Voice Coil Positioning Stage – VCS13-108-LB-01-MCF from H2W Technologies

  Santa Clarita, CA —– Motion Control – The VCS13-108-LB-01-MCF voice coil positioning stage uses H2W voice coil motor NCC13-30-108-1SH to generate a continuous/peak force of 10.8 lbs [48.0 N]/32.4 lbs [144 N] with a total stroke length of 1.3 in [31.8 mm]. The 1.0-micron resolution encoder allows for precise positioning. The load cell with […]

Motion Control – Compact Linear Induction Motor Is Available from H2W Technologies!

Santa Clarita, CA —– Motion Control – H2W engineers have developed a compact Linear Induction Motor (LMAA-04-01) that can generate 10.6 lbs [47 N] at a 15% duty cycle. Operating at 208 VAC 3-phase 60 Hz, the synchronous velocity of this LIM is 160 in/sec [4 m/s]. This LIM was designed for high speed operation; […]

Powered by WordPress | Designed by: Free Premium WordPress Themes | Thanks to Free WP Themes, wordpress 4 themes and