Archive for the ‘Positioning Stage’ Category

Motion Control – Four Axis Vacuum Compatible Gantry from H2W Technologies.

Santa Clarita, CA —– Motion Control — Fully vacuum compatible four axis positioning gantry (XYTZ). The XY axes are driven by brushless linear motor DR Positioning Stages. The Theta axis is a worm gear stage that is driven by a rotary stepper motor under closed loop control in conjunction with an arc-segmented linear encoder. The […]

Linear Motion Control – 1.0 Micron Voice Coil Positioning Stage from H2W!

    Santa Clarita, CA —– Linear Motion Control – The VCS05-060-AB-01-MC voice coil positioning stage uses H2W voice coil motor NCC05-18-060-2X to generate a continuous/peak force of 6.0 lbs [26.7 N]/18.0 lbs [80.1 N] with a total stroke length of 0.50 in [12.1mm]. The 1.0-micron resolution encoder allows for precise positioning. It comes supplied […]

Motion Control Application – Universal XYZ Robot for Microscopy and Pipetting from Intellidrives!

      Philadelphia, PA, – Motion Control Components and Systems – Manual pipetting is a time-consuming process that can lead to repetitive stress injuries. Automatic pipetting involves the use of robots to perform this type of tedious bench work, allowing scientists more time to design experiments and analyze data. Overview “Pipetting” refers to the […]

Motion Control – High Precision Vertical Elevator Stage from OES!

  Van Nuys, CA – — Motion Control Components – The AZ60-A Motorized Vertical Elevator Stage from Optimal Engineering Systems, Inc. (OES) is a low profile, compact 183.7 mm x 80 mm x 38 mm x 42mm (raised), (7.232in x 3.150 in. x 1.496 x 1.654 in.) low cost, high resolution, wedge type, vertical elevator […]

Motion Control – High Performance Ultra Compact Stepper Motor Positioning Stage!

Sunnyvale, CA, – — The motion control SMS12 Linear Stepper Motor stage is an ultra compact stage that provides up to 12 millimeters of linear motion. This stage offers near sub-micron resolution with the ability to accelerate a small load at 2G’s. A non-contact home sensor provides a reference position with repeatability of a couple […]

Motion Control – Low Cost, High Precision Vertical Lift Stage from OES!

  Van Nuys, CA – — Motion Control – The AT10-120 Motorized Vertical Stage from Optimal Engineering Systems, Inc. (OES) is a high resolution, low profile, high load vertical lift stage that can be easily integrated into almost any application. The large 220 mm x 140 mm (8.7 in. 5.5 in.) drilled and tapped platform […]

Motion Control – Linear-XYZ-Rotary Combination Stages from Intellidrives!

    Philadelphia, PA, — Motion Control Components and Systems – Intellidrives’ compact, high precision XYZ-Rotary stage is a combination of Intellidrives: LSMA XY lead-screw driven stages, an MLVT Lift stage, and an RTHM worm gear rotary table. Features include: – XY stroke 100×100 mm – Lift 13 mm – Unlimited rotation XY Lead-Screw Driven […]

Linear Motion Control – Six-Axis Linear and Rotary Positioning Stage!

Santa Clarita, CA —– Linear Motion Control – The SRS-080-10-020-01-3EXRTS is a six-axis positioning stage that consists of three rotary motors, with encoders, each mounted to three independently moving linear axis. It is ideal for applications that require independent multiple motions on a single travel plane. Each linear axis uses a H2W brushless linear motor […]

High Performance Parallelogram Voice Coil Positioning Stage From Equipment Solutions Is a Complete Positioning System!

Sunnyvale, CA, – — Motion Control Positioning Stage – The PVS-5.5 Parallelogram Voice Coil Stage from Equipment Solutions is a complete, compact high performance positioning system. This compact stage (37mm x 31 mm x 32 mm) weighing just 70 grams features a 5 mm clear aperture through the center of the motor and the friction […]

Motion Control – Single Rail Positioning Stage H Gantry from H2W Technologies.

Santa Clarita, CA —– H2W Technologies’ latest single rail positioning stage H-gantry design is an open frame XY positioning system. It has two bottom parallel axes with one cross axis connecting the two (H-gantry). Each linear axis uses H2W’s brushless linear motors (BLDM-B04), and each has a total stroke length of 25.67 in [652 mm]; […]

Powered by WordPress | Designed by: Free Premium WordPress Themes | Thanks to Free WP Themes, wordpress 4 themes and