Motion Control – Air Bearing Positioning System! Santa Clarita, CA —– Motion Control – This hybrid air bearing XZ positioning system uses H2W air bearing linear stepper motor STS-1220-AP4T (horizontal axis) and voice coil positioning stage VCS05-060-LB-01-MH (vertical Z-axis). The horizontal Air Bearing Linear Stepper motor has a 38.0 in [965 mm] stroke and […]
Archive for the ‘Positioning Stage – Dual Axis’ Category
Motion Control – Hybrid Air Bearing XZ Positioning System from H2W Technologies!


Motion Control – Select from the Large Variety of Precision XYZ Axis Stages to Suit Your Specific Application from Optimal Engineering Systems, Inc. (OES)!


Motion Control – XYZ Axis Stages to Suit Specific Applications! The two-phase stepper motors are standard with a knob for manual adjustment. The knob can be replaced with an incremental quadrature encoder for position verification. An optional three-phase brushless servo motor with optical encoder is also offered for closed loop operation and higher operating […]
Motion Control – Optimal Engineering Systems, Inc. (OES) Introduces New, Motorized, High Resolution Pan-Tilt Stages!


Motion Control – Pan-Tilt Stage The pan and tilt axes on both stages have precision V-grove and crossed roller travel guides and are driven by a worm gear with just of 0.005 degrees (18 arc-sec) of backlash. These compact, easily integrated Pan-Tilt stages weigh just 2.0 kg (4.4 lbs) for the PT60-1 and 4.4 kg […]
Motion Control – Two Axis X-Theta Voice Coil Positioning System from H2W Technologies


Motion Control – Two Axis X-Theta Positioning System Santa Clarita, CA —– Motion Control – H2W Technologies introduces a high acceleration, voice coil driven, XY-Theta positioning stage with a precision bearing system, which minimizes the amount of pitch, yaw, and roll in the system. The voice coil stage (VCS02-005-BS-01-MXYTh) is a closed loop positioning system […]
Motion Control – Three-axis Gimbal Mount from OES Features High Resolution and Stability from OES!


Motion Control – 3 Axis Gimbal Mount Van Nuys, CA – -Motion Control Components – The New AU300-AER three-axis Gimbal Mount from OES (Optimal Engineering Systems, Inc.) features full 360O rotation of each axis. This three-axis gimbal mount handles loads to 10kg (22.5 lbs) and has a clearance of 300 mm x 300 mm, […]
Motion Control – High Load, Low Profile XY Stage Features High Resolution and High Repeatability Is Available from OES!


Motion Control XY High Resolution Stage Van Nuys, CA – — Motion Control – OES (Optimal-Engineering Systems, Inc.) has added a new, larger, high load, precision stage to it’s extensive line of precision XY stages. The AU200-170×170 stage is a low profile stage measuring just 108 mm (2.252 in) high with a compact footprint (including […]
Motion Control – New High Precision, Low Profile XY Open Aperture Stage Features 1 Micron Resolution and 2 Micron Repeatability!


Van Nuys, CA – — Motion Control – OES (Optimal-Engineering Systems, Inc.) has added a new, high precision open aperture stage to it’s expanding line of precision XY stages. The AU200-100×100 stage is a low profile stage measuring just 80 mm (3.150 in.) high with a compact footprint (including the motors) of 348 mm […]