Archive for the ‘Robots’ Category

Motion Control – Large Open Center XY Stages from Intellidrives!

    Philadelphia, PA, — Motion Control Components and Systems – The demand for a high accuracy, robust, open-frame stages is met with IntelLIDrives dual-axis, large aperture stages that address the unique needs of scanning microscopy, wafer and printed circuit board inspection, automated assembly and wide range of specimens and samples scanning in many types […]

Motion Control Stages – Precision Crossed Roller, Brushless Linear Motor Stages!

  Santa Clarita, CA —– Motion Control Components – XY Cross Roller Positioning Stages – The XRS-19-09-XY-001 is a XY crossed roller positioning stage uses a brushless linear motor to generate a continuous/peak force of 52.4 lbs [233.1 N] (bottom axis), 52.4 lbs [233.1 N] (top axis) with a total stroke length of 19.0 in […]

Motion Control – Zero-Backlash Servo Rotary Indexing Table!

    Vaughan, Ontario, Canada — Motion Control Components — The Sankyo Automation RollerDrive® Reducer is a precision gear reducer that uses a zero backlash roller gear mechanism. The unit is constructed from an input shaft and a turret (output shaft) that is assembled with roller followers. The roller followers are preloaded against a screw-like […]

Motion Control – High Performance XY Stage with Linear Motors from Intellidrives!

              Philadelphia, PA, — Motion Control YX Stages Feature: Direct drive linear motors Resolution 0.1 microns Repeatability 0.25 microns Absolute accuracy 5 microns Max speed 1.5 m/sec Max acceleration 1.5 G ULTRA-PRECISION STAGE DESIGN – New IntelLiDrives XY stage design allows critical elements such as orthogonality, straightness, and flatness to […]

Motion Control – Four Axis Vacuum Compatible Gantry from H2W Technologies.

Santa Clarita, CA —– Motion Control — Fully vacuum compatible four axis positioning gantry (XYTZ). The XY axes are driven by brushless linear motor DR Positioning Stages. The Theta axis is a worm gear stage that is driven by a rotary stepper motor under closed loop control in conjunction with an arc-segmented linear encoder. The […]

Motion Control Application – Universal XYZ Robot for Microscopy and Pipetting from Intellidrives!

      Philadelphia, PA, – Motion Control Components and Systems – Manual pipetting is a time-consuming process that can lead to repetitive stress injuries. Automatic pipetting involves the use of robots to perform this type of tedious bench work, allowing scientists more time to design experiments and analyze data. Overview “Pipetting” refers to the […]

Motion Control – High Precision Vertical Elevator Stage from OES!

  Van Nuys, CA – — Motion Control Components – The AZ60-A Motorized Vertical Elevator Stage from Optimal Engineering Systems, Inc. (OES) is a low profile, compact 183.7 mm x 80 mm x 38 mm x 42mm (raised), (7.232in x 3.150 in. x 1.496 x 1.654 in.) low cost, high resolution, wedge type, vertical elevator […]

Motion Control – Linear-XYZ-Rotary Combination Stages from Intellidrives!

    Philadelphia, PA, — Motion Control Components and Systems – Intellidrives’ compact, high precision XYZ-Rotary stage is a combination of Intellidrives: LSMA XY lead-screw driven stages, an MLVT Lift stage, and an RTHM worm gear rotary table. Features include: – XY stroke 100×100 mm – Lift 13 mm – Unlimited rotation XY Lead-Screw Driven […]

Linear Motion Control – Six-Axis Linear and Rotary Positioning Stage!

Santa Clarita, CA —– Linear Motion Control – The SRS-080-10-020-01-3EXRTS is a six-axis positioning stage that consists of three rotary motors, with encoders, each mounted to three independently moving linear axis. It is ideal for applications that require independent multiple motions on a single travel plane. Each linear axis uses a H2W brushless linear motor […]

Motion Control – Single Rail Positioning Stage H Gantry from H2W Technologies.

Santa Clarita, CA —– H2W Technologies’ latest single rail positioning stage H-gantry design is an open frame XY positioning system. It has two bottom parallel axes with one cross axis connecting the two (H-gantry). Each linear axis uses H2W’s brushless linear motors (BLDM-B04), and each has a total stroke length of 25.67 in [652 mm]; […]

Powered by WordPress | Designed by: Free Premium WordPress Themes | Thanks to Free WP Themes, wordpress 4 themes and