Archive for the ‘Stages – Linear’ Category

Motion Control – Choose the Right, High Precision, Low Cost Linear Stage to Suit Your Motion Control Application!

  Van Nuys, CA – — Motion Control Components – OES (Optimal Engineering Systems) offers ten high precision, low cost linear positioning stages that can be easily integrated into new and existing applications. Choosing the best slide for the application is easy. The five AQ120 and five AQ130 series of linear motorized stages are available […]

Motion Control – Four Axis Vacuum Compatible Gantry from H2W Technologies.

Santa Clarita, CA —– Motion Control — Fully vacuum compatible four axis positioning gantry (XYTZ). The XY axes are driven by brushless linear motor DR Positioning Stages. The Theta axis is a worm gear stage that is driven by a rotary stepper motor under closed loop control in conjunction with an arc-segmented linear encoder. The […]

Motion Control – High Precision Vertical Elevator Stage from OES!

  Van Nuys, CA – — Motion Control Components – The AZ60-A Motorized Vertical Elevator Stage from Optimal Engineering Systems, Inc. (OES) is a low profile, compact 183.7 mm x 80 mm x 38 mm x 42mm (raised), (7.232in x 3.150 in. x 1.496 x 1.654 in.) low cost, high resolution, wedge type, vertical elevator […]

Motion Control – High Performance Ultra Compact Stepper Motor Positioning Stage!

Sunnyvale, CA, – — The motion control SMS12 Linear Stepper Motor stage is an ultra compact stage that provides up to 12 millimeters of linear motion. This stage offers near sub-micron resolution with the ability to accelerate a small load at 2G’s. A non-contact home sensor provides a reference position with repeatability of a couple […]

Motion Control – Linear-XYZ-Rotary Combination Stages from Intellidrives!

    Philadelphia, PA, — Motion Control Components and Systems – Intellidrives’ compact, high precision XYZ-Rotary stage is a combination of Intellidrives: LSMA XY lead-screw driven stages, an MLVT Lift stage, and an RTHM worm gear rotary table. Features include: – XY stroke 100×100 mm – Lift 13 mm – Unlimited rotation XY Lead-Screw Driven […]

Linear Motion Control – Six-Axis Linear and Rotary Positioning Stage!

Santa Clarita, CA —– Linear Motion Control – The SRS-080-10-020-01-3EXRTS is a six-axis positioning stage that consists of three rotary motors, with encoders, each mounted to three independently moving linear axis. It is ideal for applications that require independent multiple motions on a single travel plane. Each linear axis uses a H2W brushless linear motor […]

High Performance Parallelogram Voice Coil Positioning Stage From Equipment Solutions Is a Complete Positioning System!

Sunnyvale, CA, – — Motion Control Positioning Stage – The PVS-5.5 Parallelogram Voice Coil Stage from Equipment Solutions is a complete, compact high performance positioning system. This compact stage (37mm x 31 mm x 32 mm) weighing just 70 grams features a 5 mm clear aperture through the center of the motor and the friction […]

Motion Control – XYZ Voice Coil Positioning Stage from H2W Technologies!

Santa Clarita, CA —– Motion Control Components – H2W Technologies designed the VCS20-20-03-MC-01-XYZ as a 3-axis positioning solution where compact size and cost were important. Using voice coil motors, instead of 3-phase brushless linear motors, significantly reduced the overall size, weight, and cost of the system. The VCS20-20-03-MC-01-XYZ is a closed loop voice coil driven […]

Motion Control Stage Features Sub-micron Positioning, 10 mm Clear Aperture, and High Acceleration!

  Sunnyvale, CA, — Motion Control – Equipment Solutions’ Series of VCS-10 Voice Coil Stages feature: Sub-micron positioning, high acceleration, digital and/or analog position sensors, and are available with a 10 mm clear aperture! These high acceleration stages (50 G’s no load), have 10 mm of linear motion and < 3 millisecond step response time. […]

Motion Control – Dual Feedback Voice Coil Positioning Stage.

Santa Clarita, CA —– Motion Control – The VCS20-020-CR-01-MC-F3K voice coil positioning stage has dual feedback capability. It can operate either under closed loop position control with force monitoring or closed loop force control with position monitoring. It uses H2W voice coil motor NCC20-18-020-1A to generate a continuous/peak force of 2.0 lbs [8.9 N]/6.0 lbs […]

Powered by WordPress | Designed by: Free Premium WordPress Themes | Thanks to Free WP Themes, wordpress 4 themes and