Archive for the ‘Controller – Stepper’ Category

Motion Control – High Precision Linear, Pitch, Roll, and Yaw Positioning Stages Feature Four Motor Options!

Motion Control – Four-axes Linear, Pitch, Roll, and Roll Stages Van Nuys, CA – Motion Control – The new Motion Control XGGR-50-10-15-60 Series of Four-axis Linear, Pitch, Roll, and Yaw Stages from OES (Optimal Engineering Systems, Inc.) is the integration of a Linear-axis stage, two Goniometer Stages, and a Rotary Stage. The lower Linear axis […]

Motion Control Technology – Motion Controllers for 1, 2, 3, and 4 Axis of Motion Can Be Operated as Stand-alone or Can Be Host Controlled!

Motion Control Technology – Multi-axis Motion Controllers       Van Nuys, CA – Motion Control Technology – Complementing the OES (Optimal Engineering Systems Inc.) growing line of single and multi-axis positioning stages is the Allegra Series of Stored Program Motion Control Systems Controllers. The Allegra Series of Controllers is available as a desktop (pictured) […]

Motion Control – NEW! A Series of 600 mm to 1000 mm High Precision Ball Bearing Linear Guide Stages Available from OES!

Motion Control – Long Travel Linear Stages       Van Nuys, CA – — Motion Control – A series of long travel, low cost, low profile, motorized, profile rail positioning stages are now available from Optimal Engineering Systems, Inc. (OES). The AQ140 Series of linear stages are available off-the-shelf in travel lengths of: 600 […]

Motion Control – Low Cost 1, 2, 3, and 4 ADAGIO Axis Stepper Motor Motion Control Systems Available from Optimal Engineering Systems, Inc. (OES)!

Motion Control – Stepper Motor Motion Control Systems       Van Nuys, CA – — Motion Control – To complement the Optimal Engineering Systems’ (OES) expanding line of single and multi-axis motion control stages, OES has added the ADAGIO-X-STPR Series of Motion Control Systems.

Motion Control – High-quality DC Motors Equipped with Powerful Permanent Magnets

Motion Control – Brushed DC Motors Fall River, MA — Motion Control – maxon DC motors are high-quality DC motors equipped with powerful permanent magnets. The centerpiece of the motor is the globally patented ironless rotor. It offers cutting-edge technology for compact, powerful drives with low inertia. As a result of their low mass moment of […]

Motion Control – XY-Theta Alignment Stages Feature: Sub Micron Resolution!

Motion Control –  XY-Theta Alignment Stages!     Van Nuys, CA – — Motion Control – Two new XY-Theta Alignment Stages have been released by Optimal Engineering Systems, Inc. (OES). The XYR-15-60-01 and the XYR-15-60-04 Alignment Stages feature 15 mm (0.58 in.) of travel in both the X and Y axes and 360 degrees of […]

Multi-axis Controllers – Galil Achieves Prestigious UL/CSA Certification for its Range of Controller Series

Multi-axis Controllers – Galil Achieves Prestigious Certification!       Vaughan, Ontario, Canada — Multi-axis Controllers – Galil Motion Control, a renowned industry leader in the motion control market, is proud to announce the successful attainment of UL/CSA certification for several of its premier controller series. This milestone exemplifies Galil’s undying commitment to advancing safety, […]

Motion Control – Open Aperture XY Alignment Stages Feature: 120 mm x 120 mm of Travel, and 1 Micron Repeatability!

Motion Control – Open Aperture XY Alignment Stages       Van Nuys, CA – Motion Control – Optimal Engineering Systems, Inc. (OES) has released four new high resolution, high repeatability XY Alignment Stages. The AU200-120×120 Alignment Stages feature 120 mm (4.724 in.) of travel in both the X and Y axes.  These new low […]

Motion Control – High Precision Four-Axes Positioning Stages with Four Motor Options

Motion Control – Four Axes Positioning Stages   Van Nuys, CA – Motion Control – OES (Optimal Engineering Systems, Inc.) has added to their extensive line of purpose-built stages.  The new XYZR Series of Four-axes Stages are the integration of a: 15 mm, 30 mm, 50 mm, 75 mm, or 100 mm linear stages (in […]

Motion Control – Features of 600 MM Vertical Lift Stage Include: Stability, High Loading, Low Cost, and 5 Micron Repeatability!

Motion Control – 600 MM Vertical Lift Stages       Van Nuys, CA – Motion Control – The new AT20-600 series of Motorized Vertical Lift Stages from Optimal Engineering Systems, Inc. (OES) features a vertical lift of 600 mm.  The AT20-600-01 (pictured) is driven by a Two-Phase Stepper Motor features a repeatability of 5 […]

Motion Control – Four Axes XYZ-Goniometer Stages with Four Motor Options Features Positional Accuracy to 10 Microns!

Motion Control – XYZ-Goniometer Positioning Stages   Van Nuys, CA – Motion Control – OES (Optimal Engineering Systems, Inc.) is unveiling their new XYZ-Goniometer Series of Four-axes Stages.  Any of the three Goniometers Stages with +/- 10 degrees, +/- 15 degrees or +/- 45 degrees of travel can be integrated with X, Y, and Z […]

Motion Control – NEW! Elevator Stages from OES Feature 0.03 micron Resolution!

Motion Control – 0.03 micron Resolution Elevator Stage!       Van Nuys, CA – — Motion Control – Two new motorized elevator stages, the DAG20-120-01 and the DAG20-120-04 have been released by Optimal Engineering Systems, Inc. (OES).  These high resolution, compact, low profile elevator stages feature high stability 120 mm x 120 mm tables […]

Motion Control – XZ-Axis Motorized Linear Positioning Stages feature 1 Micron Repeatability from Optimal Engineering Systems, Inc. (OES)!

Motion Control – XZ-Axis  Positioning Stages       Van Nuys, CA – — Motion Control – OES (Optimal Engineering Systems) has added a new series of 15 mm, 30 mm, 50 mm, and 75 mm Linear Motion Positioning Stages to their broad selection of precision motion control components. Each of these motorized XZ-Axis Linear […]

Motion Control – Low Cost 1, 2, 3, and 4 ADAGIO Axis Stepper Motor Motion Control Systems Available from Optimal Engineering Systems, Inc. (OES)!

Motion Control – Stepper Motor Motion Control Systems Van Nuys, CA – — Motion Control – To complement the Optimal Engineering Systems’ (OES) expanding line of single and multi-axis motion control stages, OES has added the ADAGIO-X-STPR Series of Motion Control Systems. The ADAGIO-STPR Series of rack mounted Stand-alone Stepper Motor Controllers are cost effective […]

Motion Control – All New! High Precision, Three-axis Gimbal Mounts with Four Motor Options Offer Greater Flexibility and Stability!

Motion Control – NEW! Three-axis Gimbal Mounts!       Van Nuys, CA —– Motion Control – OES (Optimal Engineering Systems, Inc.) has released four all new Three-axis Azimuth, Angular Elevation, and Roll Gimbal Mounts. These new high precision and high stability AU270-AER Gimbal Mounts locate the surface of the Roll Stage 115 mm below […]

Motion Control – High Precision Built-to-Order XZR Positioning Stages Available from OES!

Motion Control – Precision Positioning Stages!     Van Nuys, CA —– Motion Control – Build-to-Order High Precision XZR Positioning Stages (X-axis, Z-axis, and Rotary- axis) are the newest addition to the OES (Optimal Engineering Systems, Inc.) family of motion control stages.  When specifying an XZR stage a user can select from a combination of […]

Motion Control – Electromate Offers Tabletop Robots from IAI!

Motion Control – Automation – Improved Tabletop Robot for Cell Production Applications, Featuring Significantly Higher Payload, Maximum Speed and Rigidity!   Vaughan, Ontario, Canada — Motion Control – Automation-Intelligent Actuator Inc. announces the release of its new TTA Series Tabletop Robots. Features include: Significantly Higher Payload and Maximum Speed- Max Payload: Work Part Side (X […]

Motion Control – Dual Axis Yaw-and-Pitch Stages Feature Full Range of Motion of Each Axis Under a Single Fixed Point in Space!

Motion Control – Yaw and Pitch Stages Van Nuys, CA – Motion Control – A new, series of Dual-axis Yaw-and-Pitch Stages have been introduced by OES (Optimal Engineering Systems, Inc.). This new series of high precision Yaw-and-Pitch stages are ideal for precise measurements of compound curves and angles of an object during inspection or reverse […]

Motion Control – High Precision XYR Alignment Stage Has Better Than +/- 3 Micron Accuracy!

Motion Control – Alignment Stage! Van Nuys, CA – — Motion Control -Optimal Engineering Systems, Inc. (OES) has introduced the XYR-300-400 Alignment Stage offering +/- 3 micron accuracy for industrial, medical, semiconductor, production, research, and laboratory applications.  The XYR-300-400 Alignment Stage features +/- 15 mm of travel in the X and Y axes and +/- […]

Motion Control – 1, 2, 3 and 4 Axes of Motion Controllers for Servos and Steppers are Low Cost and Plug-and-Play!

Motion Control – Motion Controllers for Servos and Steppers! Van Nuys, CA – — Motion Control – Need a quick and easy solution to install a single or multi-axis Plug-and-Play motion controller? The answer: The MCC Series of stepper and servo motor controllers from OES (Optimal Engineering Systems) which are designed to control from one […]

Powered by WordPress | Designed by: Free Premium WordPress Themes | Thanks to Free WP Themes, wordpress 4 themes and