Archive for the ‘Linear Motion Systems’ Category

High Performance Ultra Compact Stepper Motor Positioning Stage From Equipment Solutions!

Motion Control – Miniature Stepper Motor Stage   Forestville, CA, – — The motion control SMS12 Linear Stepper Motor stage is an ultra compact stage that provides up to 12 millimeters of linear motion. This stage offers near sub-micron resolution with the ability to accelerate a small load at 2G’s. A non-contact home sensor provides […]

Motion Control – The Engineering Edge – Application – ETX Pillow Blocks!

Motion Control – Application – Radioactive Environment ETX Pillow/Block Bearings for Radioactive Environments Motion Control – Application – This was a troublesome application. This system is completely submerged in radioactive water at a nuclear power plant. So no Teflon, no seals, no lubrication – nothing that will degrade in a radioactive environment. The majority of […]

Motion Control – Open Aperture XY Alignment Stages Feature: 120 mm x 120 mm of Travel, and 1 Micron Repeatability!

Motion Control – Open Aperture XY Alignment Stages       Van Nuys, CA – Motion Control – Optimal Engineering Systems, Inc. (OES) has released four new high resolution, high repeatability XY Alignment Stages. The AU200-120×120 Alignment Stages feature 120 mm (4.724 in.) of travel in both the X and Y axes.  These new low […]

Motion Control – Servo Controller for Non-commutated Devices, eg. voice coil motors, from Equipment Solutions!

Motion Control – Servo Controller for Non-commutated Devices! Motion Control – SCA601 Linear Servo Controller: High Performance analog PID Servo Control law; Digital control of PID tuning parameters; Analog Position Sensor input; High current linear amplifier; RS232 interface; 76 x 76 x 25     Forestville, CA, – Motion Control — The SCA601 Linear Servo […]

Motion Control – High Precision Four-Axes Positioning Stages with Four Motor Options

Motion Control – Four Axes Positioning Stages   Van Nuys, CA – Motion Control – OES (Optimal Engineering Systems, Inc.) has added to their extensive line of purpose-built stages.  The new XYZR Series of Four-axes Stages are the integration of a: 15 mm, 30 mm, 50 mm, 75 mm, or 100 mm linear stages (in […]

Motion Control – Features of 600 MM Vertical Lift Stage Include: Stability, High Loading, Low Cost, and 5 Micron Repeatability!

Motion Control – 600 MM Vertical Lift Stages       Van Nuys, CA – Motion Control – The new AT20-600 series of Motorized Vertical Lift Stages from Optimal Engineering Systems, Inc. (OES) features a vertical lift of 600 mm.  The AT20-600-01 (pictured) is driven by a Two-Phase Stepper Motor features a repeatability of 5 […]

Motion Control – Linear Motion Roll-Slide Mini from LM76

Motion Control – Miniature Linear Slide

Motion Control – Four Axes XYZ-Goniometer Stages with Four Motor Options Features Positional Accuracy to 10 Microns!

Motion Control – XYZ-Goniometer Positioning Stages   Van Nuys, CA – Motion Control – OES (Optimal Engineering Systems, Inc.) is unveiling their new XYZ-Goniometer Series of Four-axes Stages.  Any of the three Goniometers Stages with +/- 10 degrees, +/- 15 degrees or +/- 45 degrees of travel can be integrated with X, Y, and Z […]

Motion Control High Precision Linear Focus Actuator, the LFA-2014 from Equipment Solutions Features 200 Nanometer Positioning Repeatability!

Motion Control – Linear Focus Actuator       Forestville, CA, – — The motion control LFA-2014 Linear Focus Actuator has a 20 millimeter clear aperture, 14 millimeters of linear motion, 200 nanometer positioning repeatability, non-contact electro-optic analog position sensor, fully integrated SCA814 Servo Amplifier, integrated heat sink, motor coil temperature sensor, and integrated stage […]

Motion Control – 0.625 in. Diameter Miniature Voice Coil Motor Has A 0.125 in. Open Aperture!

Motion Control – Miniature Voice Coil Motor! Van Nuys, CA – Motion Control Components – Moticont is introducing their most compact miniature hollow core linear actuator; the HVCM-016-010-003-01 Linear Voice Coil Motor, featuring a 0.125 in. (3.2 mm) open aperture and high force-to-size ratio. This miniature open aperture actuator is a true DC Linear Servo […]

Motion Control – NEW! Elevator Stages from OES Feature 0.03 micron Resolution!

Motion Control – 0.03 micron Resolution Elevator Stage!       Van Nuys, CA – — Motion Control – Two new motorized elevator stages, the DAG20-120-01 and the DAG20-120-04 have been released by Optimal Engineering Systems, Inc. (OES).  These high resolution, compact, low profile elevator stages feature high stability 120 mm x 120 mm tables […]

Motion Control – Miniature Voice Coil Stage has 35 mm Travel and Features 200 Nanometer Position Repeatability!

Motion Control – Miniature Linear Voice Coil Stage Motion Control – VCS-35 Voice Coil Stage: 35mm of linear motion; Optional clear aperture; Recirculating ball bearing guidance system; 200 nanometer position repeatability; 37 G’s acceleration; Direct SCA814 Servo Controlled Amplifier compatibility; 38 x 41 x 102mm, 320 grams Forestville, CA – Motion Control – Products – […]

Motion Control – Voice Coil Motor with Internal Shaft and Bearing Features High Force to Size Ratio and 2.75 Inch Stroke Length!

Motion Control – Electric Cylinder     Van Nuys, CA – Motion Control – Components – High speed, high acceleration/deceleration, zero backlash, high accuracy, high repeatability, an internal shaft and bearing are features of Moticont’s GVCM-051-089-05S06 Linear Voice Coil Motor. This compact, voice coil motor has a high force to size ratio with 5.5 lbs […]

Motion Control – Ultra-High Precision, Compact, Low Cost, Optical Positioning System Features Zero Translation from Equipment Solutions!

Motion Control – Linear Focus Actuator     Forestville, CA, — Optical Positioning System – Developed for precision optical positioning applications the LFA-1210 Linear Focus Actuator features a patented zero-translation tangential flexure for high speed travel. The clear aperture, 10 mm (0.394 in.) stroke length and standard 12 mm optics mount (or an optional DIN […]

Motion Control – Miniature Voice Coil Stage features 1 Micron Repeatability!

Motion Control – Miniature Voice Coil Stage!       Forestville, CA, — Motion Control – This VCS-10V Voice Coil Stage: 10mm of linear motion; Ball bearing guidance system; 1 micron position repeatability; 40 G’s acceleration; Non-contact electro-optic position sensor; Kinematic load mount; Direct SCA814 Servo Controlled Amplifier compatibility; 33 x 36 x 76mm, 230 […]

Motion Control – Low Cost 1, 2, 3, and 4 ADAGIO Axis Stepper Motor Motion Control Systems Available from Optimal Engineering Systems, Inc. (OES)!

Motion Control – Stepper Motor Motion Control Systems Van Nuys, CA – — Motion Control – To complement the Optimal Engineering Systems’ (OES) expanding line of single and multi-axis motion control stages, OES has added the ADAGIO-X-STPR Series of Motion Control Systems. The ADAGIO-STPR Series of rack mounted Stand-alone Stepper Motor Controllers are cost effective […]

Motion Control – VCDS-051-031-01 Is a High Precision Linear Voice Coil Stages from Moticont!

Motion Control – Voice -Coil Stage     Van Nuys, CA – Motion Control – Components -– Moticont’s VCDS-051-032-01 series of linear motion control voice coil stages features a voice coil motor, a ball bearing linear slide, home switch, and an integral optical quadrature encoder with differential outputs. Measuring 5.000 in (127.0 mm) long x […]

Motion Control – Linear Focus Actuator from Equipment Solutions Features 200 Nano Meters Repeatability!

Motion Control – 200 Nano Meters  Repeatability Actuator!   Forestville, CA, – — Motion Control – This LFA-0604 Linear Focus Actuator: Flexture guidance system, 6 millimeter clear aperture, 4 millimeters of linear motion, 90 G’s acceleration (no load), 200 nanometers positioning repeatability, non-contact electro-optic position sensor, direct SCA814 Servo Controlled Amplifier compatibility, 38mm x 24mm, […]

Motion Control – High Precision Built-to-Order XZR Positioning Stages Available from OES!

Motion Control – Precision Positioning Stages!     Van Nuys, CA —– Motion Control – Build-to-Order High Precision XZR Positioning Stages (X-axis, Z-axis, and Rotary- axis) are the newest addition to the OES (Optimal Engineering Systems, Inc.) family of motion control stages.  When specifying an XZR stage a user can select from a combination of […]

The Engineering Edge – Jet Rail Linear Roller Blocks – Loading Instructions

Motion Control – the Engineering Edge – Jet Rail

Powered by WordPress | Designed by: Free Premium WordPress Themes | Thanks to Free WP Themes, wordpress 4 themes and