Motion Control – Elevator Stages Van Nuys, CA – — Motion Control- Optimal Engineering Systems, Inc. (OES) has released two new high precision Z-Axis Elevator Stages. The AZV9010 and the AZV9020 Motorized Z-Axis Linear Positioning Stages have vertical travels of 10 mm and 20 mm respectively. The vertical motion of each Z-Axis Stage is […]
Archive for the ‘Stages’ Category
Motion Control – High Precision Motorized Vertical Elevator Stages Are Available from OES!


Motion Control – Rotational Voice Coil Stage quickly and repeatably steers an optical beam with a diameter of up to 25 millimeters over 90° with 25 microradians of resolution!


Motion Control – Rotational Voice Coil Stage Quickly and repeatably steer an optical beam with a diameter of up to 25 millimeters over 90° with 25 microradians of resolution! RVC-9025 Rotational Voice Coil Stage: Up to 25mm wide mirror; Controllable positioning over +/-45 degree optical; 5 arcsec (25 microradians) optical position repeatability; 1 degree […]
Motion Control – Hybrid Air Bearing XZ Positioning System from H2W Technologies!


Motion Control – Air Bearing Positioning System! Santa Clarita, CA —– Motion Control – This hybrid air bearing XZ positioning system uses H2W air bearing linear stepper motor STS-1220-AP4T (horizontal axis) and voice coil positioning stage VCS05-060-LB-01-MH (vertical Z-axis). The horizontal Air Bearing Linear Stepper motor has a 38.0 in [965 mm] stroke and […]
Motion Control – Select from the Large Variety of Precision XYZ Axis Stages to Suit Your Specific Application from Optimal Engineering Systems, Inc. (OES)!


Motion Control – XYZ Axis Stages to Suit Specific Applications! The two-phase stepper motors are standard with a knob for manual adjustment. The knob can be replaced with an incremental quadrature encoder for position verification. An optional three-phase brushless servo motor with optical encoder is also offered for closed loop operation and higher operating […]
Motion Control – Optimal Engineering Systems, Inc. (OES) Introduces New, Motorized, High Resolution Pan-Tilt Stages!


Motion Control – Pan-Tilt Stage The pan and tilt axes on both stages have precision V-grove and crossed roller travel guides and are driven by a worm gear with just of 0.005 degrees (18 arc-sec) of backlash. These compact, easily integrated Pan-Tilt stages weigh just 2.0 kg (4.4 lbs) for the PT60-1 and 4.4 kg […]
Motion Control – Two Axis X-Theta Voice Coil Positioning System from H2W Technologies


Motion Control – Two Axis X-Theta Positioning System Santa Clarita, CA —– Motion Control – H2W Technologies introduces a high acceleration, voice coil driven, XY-Theta positioning stage with a precision bearing system, which minimizes the amount of pitch, yaw, and roll in the system. The voice coil stage (VCS02-005-BS-01-MXYTh) is a closed loop positioning system […]
Motion Control – Precisely Measure Curvature and Angles with New Dual-axis Pitch and Roll Stages!


Motion Control – Dual-axis Pitch and Roll Stages! Van Nuys, CA – Motion Control – The precise measurements of angles and the curvature of objects are easily determined using two new Pitch and Roll stages just introduced by OES (Optimal Engineering Systems, Inc.). The PR100-45-01 (pictured) is driven by stepper motors and the PR100-45-02 is […]
Motion Control – Case Study: Precision Ground Ball Screw Drives Universal Pipetting Module!


Motion Control Case Study – Pipetting COVID-19 Testing / Sampling Applications Reaching New Levels of Speed, Lifetime, and Force Sensitivity Woburn, MA –Motion Control Components Ball Screws – Case Study – Situation: In the area of automated laboratory equipment, servo-controlled pipetting modules are a key component of high-throughput systems. A major, global OEM had been […]
Motion Control – Compact, Open Aperture Voice Coil Stages Features 1 Micron and 30 Micron Positioning Resolutions!


Motion Control – Hollow Core Voice Coil Stage Van Nuys, CA – Motion Control – The compact open aperture HCDS-051-032-013-01-B1-30 and the HCDS-051-032-013-01-B1-01 Voice Coil Stages from Moticont have a foot print of just 2.000 in. (50.8 mm) wide by 5.000 in (127.0 mm) long and feature positioning resolutions of 30 microns and just […]
Motion Control – Linear Focus Actuator from Equipment Solutions!


Motion Control – Linear Focus Actuator Forestville, CA – The LFA-1205 Linear Focus Actuator is a high performance compact positioning system. It was specifically developed for optical applications requiring both high precision and high-speed positioning over a short to medium stroke. The LFA-1205 is well suited for optical focusing and other micropositioning applications such as scanning interferometry, […]