Motion Control Buyers Guide

Motion Control – Voice Coil Stages

Van Nuys, CA – Motion Control – The high performance compact positioning voice coil driven linear stages are used in positioning applications where high speed, high acceleration or high accuracy is required.

The motion control motorized linear stages are fully self-contained. Each stage utilizes one or two voice coil motor(s), a linear carriage system, an optical quadrature encoder feedback device and a home switch. The standard positioning resolutions of 1 micron through 29.95 microns are available for immediate delivery. Other resolutions are available upon request.

Motion Control – XY Alignment Stage

Van Nuys, CA – — Motion Control – The AU200-50×50-SC Alignment Stage from Optimal Engineering Systems, Inc. (OES) is a high resolution, high repeatability XY stage for such applications as: alignment, assembly, laser drilling, machining, medical, industrial, semiconductor handling, testing, scanning, and optical applications. The linear travel of the X and Y axes is 50 mm x 50mm, and the resolution of each axis is 5 microns (non-micro-step) or 0.125 microns (with 20 micro-steps per step motor driver in use), repeatability is 1.5 microns, and positional accuracy is 5 microns.

Motion Control – Rotational Voice Coil Stage

Quickly and repeatably steer an optical beam with a diameter of up to 25 millimeters over 90° with 25 microradians of resolution!

Motion Control – RVC-9025 Rotational Voice Coil Stage: Up to 25mm wide mirror; Controllable positioning over +/-45 degree optical; 5 arcsec (25 microradians) optical position repeatability; 1 degree optical step-and-settle in less than 5ms; Fully integrated servo controller; USB 2.0 and auxilary user electrical interfaces; X 58 x 28 x 21 millimeters, 30 grams

Forestville, CA – Motion Control – The RVC-9025 Rotational Voice Coil Stage provides a means to quickly and accurately set an angular position. The frequency is factory adjusted to customer specifications during the manufacturing process. Amplitude of the resonating mirror can be adjusted through either an analog input voltage or the USB interface.

An optional high-resolution position feedback sensor can be monitored by an analog output signal on the User Connector.

Motion Control – Servo Drive for Harsh Environments!

SERVO DRIVES THAT WITHSTAND THE ELEMENTS AND PUSH BOUNDARIES

Vaughan, Ontario, Canada — Motion Control – Advanced Motion Controls (AMC), a leading provider of servo amplifier solutions, is proud to announce the addition of six new CANopen servo drives with Extended Environment capabilities to their FlexPro® line. These new drives join AMC’s existing EtherCAT Extended Environment FlexPro drives, making the FlexPro® line the go-to solution for motion control applications in harsh environments.

Many motion control applications take place in conditions that are less than ideal, such as extreme temperatures, high and low pressures, shocks and vibrations, and contamination. Electronics, including servo drives, can malfunction or sustain permanent damage in these conditions. That’s why AMC offers off-the-shelf extended environment servo drives within the FlexPro™, DigiFlex® Performance™, and AxCent™ drive families, as well as custom-made modified servo drives to handle extreme conditions.

Motion Control – Electric Cylinder

Van Nuys, CA – Motion Control Components – Moticont has added two linear motors to it’s SDLM Series of high speed direct drive linear motors which are also know as Electric Cylinders. These compact drives with a 1.0 in. (25.4 mm) stroke are just 1.00 in. (25.4 mm) in diameter and 3.75 in. (95.3 mm) long. These direct drive linear motors feature resolutions of 5 µm (0.000197 in.) and 1.25 µm (0.000049 in.) The integral, linear optical quadrature encoder is directly connect to the shaft for the greatest possible accuracy.

Motion Control – Geared Tin Can Stepper Motors

Vaughan, Ontario, Canada — Motion Control – A feature of Nippon Pulse’s popular and reliable stepper motors, which we have been manufacturing since 1960, is the ability to add reduction gearheads. These gearheads have a wide range of ratios, from 1/400 to 6/25. In all, there are over 20 different gear ratios to choose from, depending on the motor size.

Maximum torques range from 10mN·m to 2500mN·m, depending on the size of the motor and the gear ratio. In addition to choosing from the different motor sizes and ratios, we also offer over 30 customized modifications, including shafts with flats and thru holes, coil windings, variable lead lengths, and lead wire connectors.

Motion Control – Custom Machined Linear Shafting

Motion Control – Proportional Valve Controller Modules!

Van Nuys, CA —– Motion Control – Optimal Engineering Systems, Inc. (OES) has released eight DIN Rail Mounted Proportional Valve Controller Modules.  These compact, low weight, low cost, highly reliable, Proportional Valve Controller Modules feature both low side and high side drivers. The freewheeling flyback snubber diodes are present.  Designed for open loop operation, they are ideal for: Pressure Control Valves, Flow Control Valves, Solenoids, Actuators, Voice Coil Motors, DC Motors, and Hydraulics. The closed loop version is also available upon request. The input control signals are zero to +5 VDC or zero to +10 VDC.

Motion Control – Miniature Stepper Motor Stage

Forestville, CA, – — The motion control SMS12 Linear Stepper Motor stage is an ultra compact stage that provides up to 12 millimeters of linear motion. This stage offers near sub-micron resolution with the ability to accelerate a small load at 2G’s. A non-contact home sensor provides a reference position with repeatability of a couple microns. It was specifically developed for optical applications requiring both high precision and modest-speed positioning over a short to medium stroke.

Motion Control – Harmonic Drive Actuator!

Vaughan, Ontario, Canada — Motion Control -Harmonic Drive, a leading manufacturer of precision motion control technology, is pleased to announce the release of the FHA-C Mini Actuator with Integrated Servo Drive. The FHA-C Mini Actuator features a highly efficient, integrated servo drive that allows for precise control of position, velocity, and torque. This, coupled with its compact size, makes it ideal for use in a wide range of applications, including robotics, medical equipment, and industrial automation.

Motion Control – Application – Radioactive Environment

ETX Pillow/Block Bearings for Radioactive Environments

Motion Control – Application – This was a troublesome application. This system is completely submerged in radioactive water at a nuclear power plant. So no Teflon, no seals, no lubrication – nothing that will degrade in a radioactive environment. The majority of components are stainless steel – except for our ceramic coated/supported shafting and our special, designed for this particular application/never made before, ETX self-lubricating linear blocks.

Motion Control – Precision Linear Stage

Van Nuys, CA – Optimal Engineering Systems, Inc. (OES) offers a high precision series of low cost, low profile motorized single axis positioning stages. The compact AQ110 Series of four cross roller linear stages have travel lengths of 15 mm (0.590 in), 30 mm (1.181 in), 50 mm (1.968 in), and 75 mm (2.952 in). Open loop repeatability of all stages is 0.5µ using a 10 mirco- steps-per-step Step Motor Driver or just 0.25µ using a 20 mirco-steps-per-step Step Motor Driver. Precision ground lead screws with just 2µ of backlash and high precision cross roller linear travel guides assures repeatability of 5µ, and positional accuracy of 10µ.

Motion Control – Industrial HMI

Motion Control – INTEGRATED WEB SERVER FOR INDUSTRIAL AUTOMATION APPLICATIONS

Vaughan, Ontario, Canada — Motion Control Exor, a leading provider of human-machine interface (HMI) solutions, is proud to announce the release of its eX707M Web industrial HMI. Designed for industrial automation applications, this advanced HMI offers an integrated web server, making it ideal for use in modern factory automation systems. 

Motion Control – Hollow Core Linear Voice Coil Motors

Van Nuys, CA – Motion Control – The high performance compact positioning voice coil driven linear stages are used in positioning applications where high speed, high acceleration or high accuracy is required.

The hollow core motorized linear stages are fully self-contained. Each stage utilizes a voice coil motor, a linear carriage system, an optical quadrature encoder feedback device and a home switch. The standard positioning resolutions of 1 micron through 29.95 microns are available for immediate delivery. Other resolutions are available upon request.

Motion Control – Open Aperture XY Alignment Stages

Van Nuys, CA – Motion Control – Optimal Engineering Systems, Inc. (OES) has released four new high resolution, high repeatability XY Alignment Stages. The AU200-120×120 Alignment Stages feature 120 mm (4.724 in.) of travel in both the X and Y axes.  These new low profile 87 mm (3.425 in.) high XY stages, have a 188 mm x 188 mm (7.401 in. x 7.401 in.) open aperture.  Easy integration of tooling and fixtures is facilitated through a precision series of threaded mounting holes.

Motion Control – Servo Controller for Non-commutated Devices!

Motion Control – SCA601 Linear Servo Controller: High Performance analog PID Servo Control law; Digital control of PID tuning parameters; Analog Position Sensor input; High current linear amplifier; RS232 interface; 76 x 76 x 25

Forestville, CA, – Motion Control — The SCA601 Linear Servo Controller was specifically designed to control single phase, non-comutated devices like voice coil motors. It is a high performance single axis DC motor controller and amplifier system. It is comprised of a highly integrated single PC board level product with a cohesive interface and a compact heat sink.

Motion Control – FDA Compliant Components

To: OEMs “Tooling Up” for Urgently Needed Medical Products! Use FDA Compliant Off-the-Shelf Linear Motion Components!

E. Longmeadow, MA — Motion Control  – In dealing with the COVID-19 pandemic many companies have volunteered or been requested to produce urgently needed medical products such as: Masks, gowns, and ventilators. “Tooling Up” quickly to produce medical grade products for some companies can bring challenges.

Motion Control – Four Axes Positioning Stages

Van Nuys, CA – Motion Control – OES (Optimal Engineering Systems, Inc.) has added to their extensive line of purpose-built stages.  The new XYZR Series of Four-axes Stages are the integration of a: 15 mm, 30 mm, 50 mm, 75 mm, or 100 mm linear stages (in any combination) for the X, Y, and Z axes, and a 60 mm or 100 mm diameter rotary stage capable of 360 degrees of continuous rotation.  These stages are the ideal choices for: Laser scanning, drilling, and machining, reverse engineering, inspection, assembly, measurements, tracking, and positioning.

Motion Control – Cobot Screw Driving Solutions

Vaughan, Ontario, Canada — Motion Control Components — Electromate Inc., a leading distributor of industrial automation products, motion control systems and robots has announced a new partnership with Spin Robotics, a Danish manufacturer of collaborative robot (cobot) accessories. The partnership will bring Spin Robotics’ screwdriving solutions to the Canadian market, providing customers with efficient and reliable cobot solutions for screwdriving applications.

Motion Control – Linear Optical Encoder Modules!

Van Nuys, CA – Motion Control Components – Moticont has released their OEM-00125U-01 Linear Optical Encoder Module and LS-00125U-01 Linear Scale. The compact linear encoder module measures just 51.5 mm (2.027 in.) long by 5.99 mm (0.236 in.) wide by 0.8 mm (0.073 in.) high. This high, 1.25 micron resolution, low power encoder module features TTL Quadrature Outputs and requires only a single +3.3 or +5 VDC supply.

The LS-00125U-01 Linear Scale supplied is only 6 mm (0.24 in.) wide by 0.3 (0.01 in.) high and would be attached to a flat surface using PSA adhesive. The standard scale length is 76.2 mm (3.00 in.) long. The linear scale is available with lengths up to 610.0 mm (24.00 in.). The quadrature signals are output differentially. The module also features a TTL level HOME output.