Motion Control – Linear Actuator

Cost-competitive Alternative to Pneumatics, Starting at $300 US/ea

Vaughan, Ontario, Canada — Motion Control Components — The LDL has been designed as a cost-competitive alternative to pneumatics. A common trend in industrial automation is that users are looking for electric alternatives to their pneumatic components for a number of reasons: control, cycle life, operating cost and environment, etc. The LDL series actuator features several innovative cost reduction elements that result in a list price starting at $300 US.

Motion Control – Yaw and Pitch Stages

Van Nuys, CA – OES (Optimal Engineering Systems, Inc.) has introduced three high accuracy Yaw-Pitch stages. The YP110-10-01 (stepper motor driven), the YP110-10-02 (brushless servo motor driven) and the YP110-10-03 (DC servo motor driven). The Yaw-Pitch stages are ideal for the precise measurement of angles or the curvature of an object.

The pitch stage has cross roller guides and a range of travel of +/- 10 degrees. The maximum speed is 14 degrees per second with stepper motor driven version and 90 degrees per second with the servo motor driven versions.  The 65 mm x 65 mm table has a precise pattern of threaded holes for fixtures or tooling and has an accuracy of 0.05 degrees and repeatability of +/-  0.01 degrees.

Motion Control – Multi Axis Motion Controller

Vaughan, Ontario, Canada — Motion Control Components — The DMC-21×5 is the latest addition to the Econo family and is an easy upgrade path from the long running DMC-21×3 series. The DMC-21×5 utilizes nearly all of the same peripherals as the DMC-21×3 controller, making the transition simple.

The main difference between the DMC-21×5 and its predecessor is a state of the art ARM based processor that places its communication, command processing and memory capabilities on par with Galil’s line of current generation motion controllers, while still remaining at the Econo Series price of the DMC-21×3.

Control – Miniature Electric Cylinder

Van Nuys, CA — Motion Control – Moticont’s GVCM-016-010-01 Miniature Linear Voice Coil Motor (Linear DC Motor) has a high force to size ratio with 5.0 oz (1.4) continuous force and 15.7 oz (4.4 N) of peak force with a housing measuring just 0.625 in. (15.9 mm) dia. by 0.375 in. (9.5 mm) long.

This motor features high acceleration/deceleration, high speed, high reliability, zero backlash and a 0.125 inch (3.2 mm) stroke length. This very small brushless servo motor is an ideal low cost replacement for pneumatic linear actuators.

Also called an Electric Cylinder, this linear actuator has a threaded 2-56 UNC-2A shaft for a backlash free connection. The housing and coil each have 2 2-56-UNC-2B threaded mounting holes on 0.25 in (6.35 mm) centers. The built in centered shaft facilitates the commissioning of the motor for easy integration into current and future applications.

Motion Control – Linear Servo Controller

Forestville, CA, – Motion Control – The SCA814 Linear Servo Controller was specifically designed to control single phase, non-comutated devices like voice coil motors. like it’s field proven predecessor the SCA754 is a high performance single axis DC motor controller and amplifier system. It is comprised of a highly integrated single PC board level product with a cohesive interface.

This card provides current amplification and analog servo control interfaces. The single-phase characteristic of the current amplifier makes it particularly well suited for DC motors such as galvanometers and voice coils. It was specifically developed for control of motor applications requiring both high temporal and spatial servo precision, such as machine vision, inspection, scientific imaging, medical imaging and other business applications. This amplifier interfaces directly to many of the Equipment Solution motor/stage solutions.

Motion Control – High Force Actuator to 50,000 Lbs!

Vaughan, Ontario, Canada — Motion Control — Tolomatic’s expanded extreme-force electric actuator family now includes the RSX128 actuator, rated up to 50,000 pounds of force (222.4 kN). Designed for replacing hydraulic cylinders and designed for 100 percent duty cycle, the RSX actuator features Tolomatic’s precision-ground planetary roller screws for operating life in challenging environments. Applications include assembly, metal fabrication (pressing, punching, clamping), automotive manufacturing, timber processing, motion simulators and more.

The RSX128 actuator represents a 60-percent increase in the bi-directional maximum force provided by Tolomatic’s extreme-force RSX electric actuator family. Additional frame sizes include the RSX080 which provides 18,000 lbf/80kN and the RSX096P press-model which is optimized to provide extend force up to (40,000 lbf/178 kN).

Motion Control – High Speed Integrated Bearing and Drive System

E. Longmeadow, MA –Motion Control – LM76 is the Exclusive North American Distributor of a new high speed integrated bearing and drive system featuring +/- 5 micron repeatability, and zero backlash! This new X-Axis BE125-10 Open Screw Drive System sets new standards for: Length of travel, speed, and precision for Cartesian Robots (robots that move in X,Y and Z axes according to Cartesian Coordinates also know as rectangular coordinates) and single axis linear stages!

The new X-Axis BE125-10 Open Screw Drive System is a compact linear stage measuring 125 mm (4.921 in.) wide x 86 mm (3.386 in.) high x 4391 mm (172.874 in.) long and can handle dynamic loads to 500 kg (1102 lbs). The standard stroke length is 4000 mm (157.480 in.) and custom stroke lengths to 10 m (32.8 ft) can be specified.

Motion Control – Elevator Stages

Van Nuys, CA – — Motion Control- Optimal Engineering Systems, Inc. (OES) has released two new high precision Z-Axis Elevator Stages. The AZV9010 and the AZV9020 Motorized Z-Axis Linear Positioning Stages have vertical travels of 10 mm and 20 mm respectively.

The vertical motion of each Z-Axis Stage is driven by an 8 mm diameter ball screw with a 1 mm lead, and guided by cross roller bearings. Very high resolutions of 0.1 micron or 0.05 microns with 10/20 micro-steps per step motor drive, and repeatability of +/- 0.5 microns makes these two Z-Axis Stages ideal for: Microscopy, inspection, metrology, positioning, photonics, sampling, and laser drilling and machining.

Motion Control – Micro-sized high-power Servo Drive!

Vaughan, Ontario, Canada – Motion Control – The FM060-25-CM is part of a new breed of micro-sized, high-power servo drives, immediately available from ADVANCED Motion Controls. Rated to output 25A continuous and 50A peak, this fully featured digital servo drive is small enough to fit in the tightest locations. It is ideally suited for mobile and portable applications such as mobile robotics, automated mobile robots (AMRs), AGVs, material handling, warehouse automation, lab automation and more.

The mounting footprint of the FM060-25-CM is 50.8mm x 25.4mm with a height of 22.1mm making it possible for up to 3 units to fit within the footprint of a standard business card. The FM060-25-CM uses CANopen for network communication. Along with this model are two lower current options, the FM060-10-CM rated to 10A continuous and FM060-5-EM rated to 5A continuous, designed to the same dimensions.

Motion Control – Harmonic Drive Ultra-Light Weight Gearhead!

Vaughan, Ontario, Canada — Motion Control Products – Introducing the new CSF-ULW ultra-light weight gearhead series from Harmonic Drive LLC. This series features a newly engineered lightweight structure with an ultra-compact shape.

The CSF-ULW is a housed zero backlash Harmonic Drive® component gearset combined with a precision cross roller output bearing & flange. The CSF-ULW is available in two sizes, with three reduction ratio’s per size. The ULW series maintains the same performance standards as the popular CSF-2UH series.

Motion Control – Miniature Voice Coil Motor

Van Nuys, CA — Motion Control – Moticont’s GVCM-016-010-01 Miniature Linear Voice Coil Motor (Linear DC Motor) has a high force to size ratio with 5.0 oz (1.4) continuous force and 15.7 oz (4.4 N) of peak force with a housing measuring just 0.625 in. (15.9 mm) dia. by 0.375 in. (9.5 mm) long. This motor features high acceleration/deceleration, high speed, high reliability, zero backlash and a 0.125 inch (3.2 mm) stroke length. This very small brushless servo motor is an ideal low cost replacement for pneumatic linear actuators.

Also called an Electric Cylinder, this linear actuator has a threaded 2-56 UNC-2A shaft for a backlash free connection. The housing and coil each have 2 2-56-UNC-2B threaded mounting holes on 0.25 in (6.35 mm) centers. The built in centered shaft facilitates the commissioning of the motor for easy integration into current and future applications.

This clean, quiet, efficient, low inertia, high reliability actuator is ideal for: Heptic feedback and pipetting in medical devices, switch activation, testing, sorting, assembly equipment, work holding and clamping, scanners and laser beam steering and filtering, laser, machining and drilling, optical focusing, and dynamic vibration absorption. Moticont also offers DC and servo motor drivers.

Is there a need for a higher force or longer stroke? There are currently 7 series of Moticont GVCM motors based on diameter of this motor.

To find the right motor for you application go to: http://moticont.com/linear-motor-with-bearing.htm

About Moticont – Moticont is a manufacturer of motion control products. Their product line includes voice coil motors, three phase brushless motors and positioning stages and slides.

Moticont is committed to exceeding their customers’ quality expectations and industry standards throughout the design, manufacturing, service and technical support phases. Their modern manufacturing facility, highly controlled processes, committed staff, and extensive testing complement their product design strengths. This enables them to supply their clients with specialized small orders to high volume just-in-time deliveries.

They offer an extensive line of standard products ready to be shipped immediately from stock, and when standard products are not quite right for an application, highly trained design engineers are always available to develop custom motion control products to fit the specific needs or our customers.

For additional information contact Sales Team at Moticont, 6901 Woodley Ave, Van Nuys, CA 91406; Toll Free: +1 (888) 785-1804, Tel: +1 (818) 785-1800, moticont@moticont.comor visit the website at http://www.moticont.com

See this and other Motion Control Components from Moticont featured on:

http://MotionShop.com.com

http://AllMotionBlogger.com

http://Automation-Blogger.com

http://MotionControlBlogger.com

http://motioncontrolBuyersGuide.com

http://MotionControlWeb.com

http://MotionShop.net

http://Catalogs-MotionControl.com

Motion Control – Integrated Stepper Motor Controller and Driver

Other features include home and limit switches per axis, joystick interface, TTL/CMOS inputs and outputs, quadrature encoder feedback, USB and optional Ethernet interfaces permits each module to be customized for specific applications. The ICAD series is powered from a single power supply up to +48 VDC. The high voltage power supply allows for high speed operation.Van Nuys, CA – — Motion Control – Optimal Engineering Systems, Inc. (OES) has introduced their new ICAD Series of integrated motion controllers and drivers for 2-phase stepper motors. Available as 1, 2, 3, and 4 axes modules (pictured) they are ideal for NEMA 8 to NEMA 42 stepper motors. These compact 6.000 in. x 8.000 in. plug-and-play, integrated controllers incorporate high resolution micro-stepping drivers for precise positioning.

Additional features of these ICAD Series modules include: Low power consumption, auto current reduction, high torque and high speed capabilities, serially or manually controllable, or host controlled. Modes of motion include: Point-to-point positioning, jogging, and coordinated motion.

Another option is to program the motion controller using an easy programing language and store the code in the flash memory for automatic operation. No compiler or assembler is required. User friendly software that allows for easy setup is included. Using the software, an operator can move each axis by using the control panel or a joystick.

About OES – Optimal Engineering Systems, Inc. (OES) is a manufacturer of motion control products including: Stepper motor controllers and drivers, solenoid electronics, and positioning stages and slides. Applications include: Animation, automated assembly systems, automation, CNC machines, flight simulation, inspection systems, linear and rotary stages, machine tools, medical devices, motion control camera boom systems, optical comparators, CMMs, pan-tilt gimbals, PCB assembly & inspection, pick-and-place, positioning stages, robotics, scanners, security cameras, telescope drive mechanisms, time-lapse photography and winders.

Some of the industries OES serves are: Aerospace, Astronomy, Chemical, Communications, Educational Institutes, University, Colleges, Government Agencies, National Labs, Manufacturing, Medical, Metrology, Military, Motion Control, Museum, News Agencies, Semiconductor and Test Equipment. Optimal Engineering Systems, Inc’s. competitive advantage is its state-of-the-art in-house manufacturing facility in North America enabling OES to supply clients with custom designed orders or high volume just-in-time deliveries globally.

For additional information, contact sales team at: OES, 6901 Woodley Ave.; Van Nuys, CA 91406; Telephone: 888-777-1826 or +1 818-222-9200, FAX +1 818-436-0446 or E-Mail: sales@oesincorp.com or visit the website at http://www.oesincorp.com

See this and other Motion Control Components from OES (Optimal Engineering Systems, Inc.) featured on:

http://MotionShop.com.com

http://AllMotionBlogger.com

http://Automation-Blogger.com

http://MotionControlBlogger.com

http://motioncontrolBuyersGuide.com

http://MotionControlWeb.com

http://MotionShop.net

http://Catalogs-MotionControl.com

OES is on Facebook

OES is on Twitter

OES Videos

Vaughan, Ontario, Canada — Motion Control Components — After the successful introduction of the complete range of ServoStep integrated motors JVL is now releasing Add-On-Instructions for fast and easy setup and programming in Rockwell Automation’s Studio 5000 software.

All-in-one unit: Motor, Absolute multiturn encoder, Drive, Controller, PLC and Ethernet Switch as well as TÜV-approved STO option. The integrated design with the controller in the motor minimizes the size of the control cabinet. With less components in the cabinet, the cooling requirements will be lower, reducing both system cost and running costs.

JVL´s ServoStep motors offer state-of-the-art performance that in some applications can rival servo motors at a lower cost. The high torque at low speeds make compact solutions without gear possible. The ServoStep family offers up to double power in same size compared to similar motors, due to higher current/voltage and advanced regulation.

JVL’s closed-loop ServoStep technology eliminates loss of steps and never stalls. The technology causes a paradigm shift that changes your perception of what you can do with a stepper motor. Ultra-high torque enables direct drive without gearing. The motor series also has current control, which lowers power consumption and allows 100% duty cycle without overheating. The ultra-high step resolution of 409,600 step/rev decreases acoustic noise and results in a smooth-running motor.

The wide speed range from 0 to 3000 rpm can be adjusted in increments of 0.01 rpm. Due to automatic tuning, programming is fast and easy.

The motors have 8 programmable inputs/outputs: each can be set up as digital input, digital output or analog input. Motors are equipped with EtherNet/IP interface and as option you can choose STO (Safe Torque Off) versions.

The motors are perfect for multi-axis applications and format adjustments where high positioning speed is required. Due to ultra-high torque, no gear is needed.

For end-of-line packaging and food and beverage applications enclosure class IP65 can be delivered.

To fulfil the demands for diagnostics and easy maintenance in factories of the future the motors are designed for IIoT and are Industry 4.0 ready.

The motors include a 2-port Ethernet switch to reduce wiring in daisy-chain configuration (DLR). Several LEDs enable technicians and operators to get a quick status overview.

To save time, Add-On-Instructions are available for Studio 5000. It makes commissioning fast and easy and the motors can be set up in 5 minutes or less.

Industrial Ethernet:

The motors have the ability to be upgraded with other protocols or newer versions of the same protocol at any time. Because of the upgradeability, the JVL industrial Ethernet interface is also ‘future proof’ as newer versions of the protocols will always fit into the design. The user can switch between Profinet, EtherCAT, Powerlink, EtherNet/IP, Modbus TCP and SERCOS.

Information on the Integrated Servo & Stepper Motors from JVL can be found at – https://www.electromate.com/jvl-industri-elektronik.html

About Electromate: Electromate’s Core Purpose is to help Manufacturers build better machines using differentiated motion control automation technology. They specialize in Robotic and Mechatronic Solutions for the Industrial Automation marketplace. Respected by customers as a premiere source for High Performance Automation and Motion Control Components & Systems, Electromate® specializes in AC & DC Servo and Stepper Motors & Drives, Motion & Automation Controllers, Positioning Systems & Actuators, Feedback Devices, Gearing Products and HMI’s & Operator Displays, all supported via extensive product selection, just-in-timedelivery, dedicated customer service and technical engineering support.

More on Electromate can be found at

Website: http://www.electromate.com

LinkedIn: https://www.linkedin.com/company-beta/209277/

Twitter: https://twitter.com/Electromate

Facebook: https://www.facebook.com/electromateindustrial/

For more information on the “Innovation and Technology Award”

CLICK HERE!

For more information on the “2021 Excellence Award”

CLICK HERE!

For more information on the 2025-2026 “Best Place to Work” CLICK HERE!

For more information on the “AHTD Award” CLICK HERE!

To view Electromate’s new corporate video CLICK HERE

For further information on this new product or others in our extensive product portfolio, call 1-877-SERVO99 (737-8699) or e-mail Warren Osak at sales@electromate.com or visit Electromate at: www.electromate.com

See this and other Motion Control Components from Electromate featured on:

http://MotionShop.com

http://MotionControl-XYZ-Theta.com

http://LinearMotionBlogger.com

http://AllMotionBlogger.com

http://Automation-Blogger.com

http://MotionControlBlogger.com

http://MotionControlBuyersGuide.com

http://MotionControlWeb.com

http://MotionShop.net

http://MotionControlMarketing.com

Motion Control – Linear Bearings Application

Linear Motion Application – How Do You Move Articles of Antiquity?

Very Carefully With A High Load Rail System from LM76!

E. Longmeadow, MA – — The Boston Museum of Fine Arts (MFA) has to move articles of antiquity from one location to another. In this instance, they are moving a 5000 year old relief (hieroglyphics) weighing 8000 pounds to a new location in the Museum. Here is a frontal photo of the Relief from The Tomb of Senenuka.

Part of wall from tomb of Senenuka; nine stones fitting together and including two niches; lower left piece smooth limestone; upper far left preliminary black ink sketch; right of this sketch is a complete relief showing two seated figures; central piece has large scene of seated male on the left and other smaller male figure to the right; upper far right male figure relief outline; left of this again a scene of two seated figures at a table.

Senenuka Time of Khufu or Khafre (Maybe Dyn 5?) Overseer of the Pyramid-town of Khufu, Director of King’s wad-priests, Boundary official of a settlement, etc.

The MFA contracted CBI Consulting of Boston to design the frame and fixturing. Craig Barnes, an award winning architectural engineer called Mike Quinn of LM76 to review the linear motion application. Over the course of several weeks, LM76 and design partner Todd Kanipe designed a telescoping, high load roller/linear motion rail system that won approval. According to CBI’s Keith Bouchard, the linear rail system moves very smoothly and so far meets the expectations of this program.”

Linear Motion Application – According to MFA Antiquity Specialist Jean Louis Lachevere, “All of these moves present very real dangers to the artifact being transported. In this case, we have a 8000 pound relief which already has its problems due to age and the fact that it is limestone ( limestone is very vulnerable to the atmosphere ).” Seen from the front, the relief is straight. From the back, much of the top back is gone. Thus, the back of the relief has to be plastered so the back is flat. Pins are inserted to further reinforce the relief and then it is tipped on its back. It is then moved to its new atmospherically controlled display case. LM76’s design is used in the transfer from the dolly to the mounting rails and restraints in the display case. This 36” motion is fraught with things that can go wrong. One of the considerations is the possibility of an earthquake…any problem conceivable is taken into account.

Castors and sliders at end of armature. The sliders are mounted to the castors and work like telescoping drawer slides.

Castors and sliders as seen from below. The chalk X is used to mark the block where added weld is required. Each block is to be welded both sides. Each slider is to be addressed.

Photo demonstrates that the wheels can rotate independently.

View of the slider assembly at the center of the welded fixture.

For Additional Information on LM76’s High Load Rail Systems go to: http://www.lm76.com

Founded in 1976, LM76 has been a leading designer/manufacturer of linear bearings, slides and linear motion systems. LM76 is renowned for its industry leading Minuteman Teflon® Composite linear bearings. LM76 is a leading supplier of precision linear shafting: RC60, 300 Series Stainless Steel, and ceramic-coated aluminum shafting. LM76 also offers several FDA/USDA compliant linear bearings and slides for the food processing, pharmaceutical, medical, and packaging industries.

For additional information contact Mike Quinn at: LM76, 140 Industrial Dr., E. Longmeadow, MA 01028; Telephone: 413-525-4166, Fax: 413-525-3735 or E-Mail: mquinn@lm76.com or visit the website at http://www.lm76.com

About LM76 and “The Engineering Edge”

Founded in 1976, LM76 has been a leading designer/manufacturer of linear bearings, slides and linear motion systems. LM76 is renowned for its industry leading Minuteman PTFE Composite linear bearings. LM76 is a leading supplier of precision linear shafting: RC60, 300 Series Stainless Steel, and ceramic-coated aluminum shafting. LM76 also offers several FDA/USDA compliant linear bearings and slides for the food processing, pharmaceutical, medical, and packaging industries.

When others think catalog …   … LM76 thinks solution!

For additional information contact Mike Quinn at: LM76, 140 Industrial Dr., E. Longmeadow, MA 01028; Telephone: 413-525-4166, Fax: 413-525-3735 or E-Mail: mquinn@lm76.com or visit the website at http://www.lm76.com

See this and other Motion Control Components from LM76 are also featured on:
http://MotionShop.com
http://AllMotionBlogger.com
http://Automation-Blogger.com
http://MotionControlBlogger.com
http://MotionControlBuyersGuide.com
http://MotionControlWeb.com
http://MotionShop.net
Industrial Safety – Request the “Gotcha-Stick”
LM76 Blog
LM76 Catalogs

Motion Control –  Miniature Linear Voice Coil Motor!

Whether it is a longer stroke or a higher force that is required for an application, each of these highly efficient, clean, miniature brushless DC servo motors has high acceleration / deceleration, low inertia, and zero cogging, making them ideal for: Assembly, sorting, laser machining and drilling, haptic feed back, packaging, sampling, work holding and clamping, scanning, laser beam steering and filtering, wafer handling, and medical and pharmaceutical applications. Both the LVCM-025-038-01 and the LVCM-025-038-02 feature very high accuracy and repeatability when operated as a DC servo motor in a closed servo loop. Each linear motor also features a 10-32 UNC-2B threaded mounting hole in the housing and two 6-32 UNC-2B threaded mounting holes in the coil end on 0.50 in. (25.4 mm) centers for easy integration into new and existing applications. A complete plug-and-play system including an encoder and servo controller is also available.Van Nuys, CA — Motion Control Components – Moticont has added two miniature linear voice coil motors to its LVCM family of Linear Voice Coil Motors! Sharing the same physical dimensions, each is just 1.000 in. (25.4 mm) in diameter and the housings are 1.500 in. (38.1 mm) long. As every application is different Moticont offers two motor in the LVCM-025 Series of Voice Coil Motors. The LVCM-025-038-01 features a continuous force of 2.5 lbs (11.0 N) and a peak force of 7.8 lbs (34.7 N) and the LVCM-025-038-02 features a 1.000 in (25.4 mm) stroke, whereas, the LVCM-025-038-01 features a stroke of 0.37 in. (9.5 mm ) and the LVCM-025-038-02 features a continuous force of 16.4 oz (4.6 N) and a peak force of 51.9 oz (14.4 N).

If there a need for a still smaller or larger diameter motor, one with longer travel, or more force? There are 12 choices in this family of Moticont’s LVCM linear motors based on diameter of the motor, and over 50 models based on length of stroke and/or force to select from. To find the right motor for your application go to http://moticont.com/voice-coil-motor.htm

About Moticont – About Moticont – Moticont is a manufacturer of motion control products. Their product line includes voice coil motors, three phase brushless motors and positioning stages and slides.

Moticont is committed to exceeding their customers’ quality expectations and industry standards throughout the design, manufacturing, service and technical support phases. Their modern manufacturing facility, highly controlled processes, committed staff, and extensive testing complement their product design strengths. This enables them to supply their clients with specialized small orders to high volume just-in-time deliveries.

They offer an extensive line of standard products ready to be shipped immediately from stock, and when standard products are not quite right for an application, highly trained design engineers are always available to develop custom motion control products to fit the specific needs or our customers.

For additional information contact Sales Team at Moticont, 6901 Woodley Ave, Van Nuys, CA 91406; Toll Free: +1 (888) 785-1804, Tel: +1 (818) 785-1800, moticont@moticont.comor visit the website at http://www.moticont.com

See this and other Motion Control Components from Moticont featured on:

http://MotionShop.com.com

http://AllMotionBlogger.com

http://Automation-Blogger.com

http://MotionControlBlogger.com

http://motioncontrolBuyersGuide.com

http://MotionControlWeb.com

http://MotionShop.net

http://Catalogs-MotionControl.com

Motion Control – Linear Rotary Actuator!

Vaughan, Ontario, Canada — Motion Control Components — The LBR40 is a slim, stackable linear rotary actuator with a SMAC HT35 direct drive brushless motor. Encoder resolutions are available from 5 micron to 1um for application flexibility to optimize on position control. Priced competitively with the added benefit of real time feedback of data required to assure quality. IP67 protection is available as well as a built-in controller with popular communication protocols.

The LBR provides a long life cycle, high linear force and rotary torque, and is specifically designed for Capping, Thread Inspection, and Smart Screw Driving applications.

Information on the LBR40 series linear rotary actuator from SMAC can be viewed at: https://www.electromate.com/pub/media/assets/catalog-library/pdfs/SMAC/SMAC_2020_Product_Catalog.pdf

About Electromate: Electromate’s Core Purpose is to help Manufacturers build better machines using differentiated motion control automation technology. They specialize in Robotic and Mechatronic Solutions for the Industrial Automation marketplace. Respected by customers as a premiere source for High Performance Automation and Motion Control Components & Systems, Electromate® specializes in AC & DC Servo and Stepper Motors & Drives, Motion & Automation Controllers, Positioning Systems & Actuators, Feedback Devices, Gearing Products and HMI’s & Operator Displays, all supported via extensive product selection, just-in-timedelivery, dedicated customer service and technical engineering support.

More on Electromate can be found at

Website: http://www.electromate.com

LinkedIn: https://www.linkedin.com/company-beta/209277/

Twitter: https://twitter.com/Electromate

Facebook: https://www.facebook.com/electromateindustrial/

For more information on the “Innovation and Technology Award”

CLICK HERE!

For more information on the “2021 Excellence Award”

CLICK HERE!

For more information on the 2025-2026 “Best Place to Work” CLICK HERE!

For more information on the “AHTD Award” CLICK HERE!

To view Electromate’s new corporate video CLICK HERE

For further information on this new product or others in our extensive product portfolio, call 1-877-SERVO99 (737-8699) or e-mail Warren Osak at sales@electromate.com or visit Electromate at: www.electromate.com

See this and other Motion Control Components from Electromate featured on:

http://MotionShop.com

http://MotionControl-XYZ-Theta.com

http://LinearMotionBlogger.com

http://AllMotionBlogger.com

http://Automation-Blogger.com

http://MotionControlBlogger.com

http://MotionControlBuyersGuide.com

http://MotionControlWeb.com

http://MotionShop.net

http://MotionControlMarketing.com

Motion Control – Pan-Tilt Stage

The pan and tilt axes on both stages have precision V-grove and crossed roller travel guides and are driven by a worm gear with just of 0.005 degrees (18 arc-sec) of backlash. These compact, easily integrated Pan-Tilt stages weigh just 2.0 kg (4.4 lbs) for the PT60-1 and 4.4 kg (9.75 lbs) for the PT100-1 and load capacities are 10 kg (22 lbs) and 20 kg (44 lbs) respectively).Van Nuys, CA – — Motion Control – High Resolution, Motorized, Pan-Tilt Stages have been added to the extensive line of OES (Optimal Engineering Systems, Inc.) motion control products. These motorized Pan-Tilt Stages are available in two sizes. The PT60-1 Pan-Tilt Stage is a combination of two 60 mm (2.362 in.) rotary stages and the PT100-1 is a combination of two 100 mm (3.937 in.) rotary stages, set at a 90 degree angle to each other. The rotary stages of each Pan-Tilt stage features a high repeatability of 0.005 degrees (18 arc-sec), a positional accuracy of 0.005 degrees (18 arc-sec), and a resolution of 0.001 degrees = 3.6” (10 Micro-steps per Step Motor Driver in use). These Pan (horizontal table)-Tilt (vertical table) Stages are deal for: Scanning, testing, inspection, assembly, positioning, laser and micro machining, pointing optics and cameras, and other applications.

Each axis is driven by a standard bi-directional stepper motor with a knob for manual adjustments and each rotary axis has a vernier scale for setup. The knob on each motor can be replaced with an optional encoder for position verification. Travel speed of each axis is 12O per second with a stepper motor or for higher speeds and closed loop operation, servo motors are available. Electrical connections are made using 9 pin DB-9 connectors.

The PT60-1 and the PT100-1 Pan-Tilt Stages can be ordered as complete plug-and-play systems with a multi-axis controller, joystick, trackball or keypad.

About OES – Optimal Engineering Systems, Inc. (OES) is a manufacturer of motion control products including: Stepper motor controllers and drivers, solenoid electronics, and positioning stages and slides. Applications include: Animation, automated assembly systems, automation, CNC machines, flight simulation, inspection systems, linear and rotary stages, machine tools, medical devices, motion control camera boom systems, optical comparators, CMMs, pan-tilt gimbals, PCB assembly & inspection, pick-and-place, positioning stages, robotics, scanners, security cameras, telescope drive mechanisms, time-lapse photography and winders.

Some of the industries OES serves are: Aerospace, Astronomy, Chemical, Communications, Educational Institutes, University, Colleges, Government Agencies, National Labs, Manufacturing, Medical, Metrology, Military, Motion Control, Museum, News Agencies, Semiconductor and Test Equipment. Optimal Engineering Systems, Inc’s. competitive advantage is its state-of-the-art in-house manufacturing facility in North America enabling OES to supply clients with custom designed orders or high volume just-in-time deliveries globally.

For additional information, contact sales team at: OES, 6901 Woodley Ave.; Van Nuys, CA 91406; Telephone: 888-777-1826 or +1 818-222-9200, FAX +1 818-436-0446 or E-Mail: sales@oesincorp.com or visit the website at http://www.oesincorp.com

See this and other Motion Control Components from OES (Optimal Engineering Systems, Inc.) featured on:

http://MotionShop.com.com

http://AllMotionBlogger.com

http://Automation-Blogger.com

http://MotionControlBlogger.com

http://motioncontrolBuyersGuide.com

http://MotionControlWeb.com

http://MotionShop.net

http://Catalogs-MotionControl.com

OES is on Facebook

OES is on Twitter

OES Videos

Motion Control – Linear Actuator Gives Higher Throughput! 

The SDLM-019-070-01-01 direct drive linear motor has a stroke length of 0.500 in. (12.7 mm) and a continuous force rating of 7.3 oz. (2.0 N) and peak force of 23.0 oz (6.4 N).  This non-commutated direct drive servo motor features: Quiet long life, plain linear bearings, an integrated internal 1.25 micron resolution (0.000049 in.) quadrature optical encoder with differential outputs, and a non-rotating shaft.  Applications include: Manufacturing (assembly and inspection equipment), sorting and packaging, semiconductor handling, medical procedure tables and instruments, antenna positioning, dampers, door & valve actuators, agricultural equipment, shaking, and adjustable office furniture.Van Nuys, CA – Motion Control Products – The new patented SDLM-019-070-01-01 direct drive linear motor with integrated position and temperature sensors is the latest addition to the series of zero backlash, zero cogging, high acceleration, high speed, high resolution, long life motors from Moticont. Also known as an electric cylinder, this compact direct drive linear motor is just 0.75 in. (19.1 mm) in diameter and 2.75 in (69.9 mm) long.  Protected inside the motor housing, the linear optical quadrature encoder is directly connected to the shaft for the greatest possible accuracy. Highest throughputs are achieved by the SDLM-019-070-01-01 linear motor when operating at peak efficiency monitoring the data from the internal temperature sensor.

Direct coupling of the load or stage to the low inertia non-rotating shaft eliminates backlash and allows for high acceleration/deceleration.  Both ends of the actuator and shaft ends have threaded mounting holes for easy integration into new and existing applications. The SDLM-019-070-01-01 Direct Drive Linear Actuator is also available with a matching servo controller

About Moticont – About Moticont – Moticont is a manufacturer of motion control products. Their product line includes voice coil motors, three phase brushless motors and positioning stages and slides.

Moticont is committed to exceeding their customers’ quality expectations and industry standards throughout the design, manufacturing, service and technical support phases. Their modern manufacturing facility, highly controlled processes, committed staff, and extensive testing complement their product design strengths. This enables them to supply their clients with specialized small orders to high volume just-in-time deliveries.

They offer an extensive line of standard products ready to be shipped immediately from stock, and when standard products are not quite right for an application, highly trained design engineers are always available to develop custom motion control products to fit the specific needs or our customers.

For additional information contact Sales Team at Moticont, 6901 Woodley Ave, Van Nuys, CA 91406; Toll Free: +1 (888) 785-1804, Tel: +1 (818) 785-1800, moticont@moticont.comor visit the website at http://www.moticont.com

See this and other Motion Control Components from Moticont featured on:

http://MotionShop.com.com

http://AllMotionBlogger.com

http://Automation-Blogger.com

http://MotionControlBlogger.com

http://motioncontrolBuyersGuide.com

http://MotionControlWeb.com

http://MotionShop.net

http://Catalogs-MotionControl.com

Motion Control – Linear Motion Stages

Van Nuys, CA – MotionControl  Stages – The compact open aperture HCDS-051-032-013-01-B1-30 and the HCDS-051-032-013-01-B1-01 Voice Coil Stages from Moticont have a foot print of just 2.000 in. (50.8 mm) wide by 5.000 in (127.0 mm) long and feature positioning resolutions of 30 microns and just 1 micron respectively. These precision linear motion stages allow the user to select the level of precision needed for an application.

The 1 micron resolution HCDS-051-032-013-01-B1-01 Voice Coil Stage features cross roller linear bearings whereas the 30 micron HCDS-051-032-013-01-B1-30 Voice Coil Stage uses linear ball bearings.

Motion Control – Application – Ceramic Linear Bearings

Motion Control – Anyone who’s worked on cars knows how critically important ball joints are to steering and suspension. They also know what happens when ball joints fail!

E. Longmeadow, MA – — Motion Control – Application Story – When an aftermarket manufacturer of off-road steering and suspension systems needed an upper ball joint bearing, they called LM76. These systems are purchased by off-road vehicle owners who want to upgrade their OEM steering and suspension units for hard-hitting environments. Pounding, shock, sand and debris are all part of the mix when it comes to extreme off-roading and LM76 Black Racer bearings are right at home. According to company engineers, after a year of brutal testing, Black Racer met all design goals and exceeded expectations.