Archive for the ‘Motion Control Technology Products – Mechanical’ Category

Motion Control – Four Axes XYZ-Goniometer Stages with Four Motor Options Features Positional Accuracy to 10 Microns!

Motion Control – XYZ-Goniometer Positioning Stages   Van Nuys, CA – Motion Control – OES (Optimal Engineering Systems, Inc.) is unveiling their new XYZ-Goniometer Series of Four-axes Stages.  Any of the three Goniometers Stages with +/- 10 degrees, +/- 15 degrees or +/- 45 degrees of travel can be integrated with X, Y, and Z […]

Motion Control – Miniature Voice Coil Motor Only 19.1 mm in Diameter Has 22.2 mm Stroke and High Force-to-Size Ratio!

Motion Control – Miniature Voice Coil Motor!   Van Nuys, CA – Motion Control – The miniature hollow core HVCM-019-032-003-02 Voice Coil Motor, featuring a 3.2 mm open aperture and high force-to-size ratio has been introduced by Moticont. A true DC Servo Motor, it has a continuous force rating of 2.1 N (7.4 oz.) and […]

Motion Control – Low Cost, High Accuracy, Straight and Curved Rail & Roller Block Systems!

Motion Control – Curved Rail & Roller Block Systems E. Longmeadow, MA –Motion Control – SAIBO is one of world recognized manufacturers of precision power transmission components. SAIBO group has two divisions, linear motion division and bearing division. Linear Product Division mainly produces curved rail and conveyor, telescopic rail and fork, linear guide, linear module, […]

Motion Control SPS15 Power Supply from Equipment Solutions for Voice Coil Actuators!

Motion Control – Voice Coil Motor Power Supply! Forestville, CA, – — The motion control SPS15 power supply will power any Equipment Solutions Linear Focus Actuator. With its universal instrumentation cord power entry module you will be able to run power from literally anywhere in the world anywhere.

Motion Control – Sub-micron Z-Axis Positioning Stages with Four Motor Options Introduced by OES!

Motion Control – Z-axis Stages Van Nuys, CA – Motion Control – OES (Optimal Engineering Systems, Inc.) has added vertical stages to their extensive line of high accuracy, high resolution lift stages.  

Motion Control – Three-Axis Yaw, Pitch, and Roll Positioning Stages Feature Four Motor Options!

Motion Control – Yaw Pitch and Roll Stage Van Nuys, CA – Motion Control – New compact three-axis, Yaw, Pitch, and Roll Stages from OES (Optimal Engineering Systems, Inc.) feature four motor options to meet the precision and speed of travel requirements of an application.

Motion Control – New Harmonic Drive HPF Series: High-Performance Hollow Shaft Gear Unit

Innovations in Motion Control Products – HPF Harmonic Drive Series

Motion Control – Miniature Voice Coil Stage features 1 Micron Repeatability!

Motion Control – Miniature Voice Coil Stage!       Forestville, CA, — Motion Control – This VCS-10V Voice Coil Stage: 10mm of linear motion; Ball bearing guidance system; 1 micron position repeatability; 40 G’s acceleration; Non-contact electro-optic position sensor; Kinematic load mount; Direct SCA814 Servo Controlled Amplifier compatibility; 33 x 36 x 76mm, 230 […]

Motion Control – Eight New High Resolution, High Repeatability Yaw-and-Pitch Stages for the Measurement of Angles and Curvatures!

Motion Control – Yaw and Pitch Stages Van Nuys, CA – Motion Control – Eight new Yaw-and-Pitch Stages have been introduced by OES (Optimal Engineering Systems, Inc.). These new series of high precision Yaw-and-Pitch Stages integrate Goniometers as the lower stage (yaw axis) and a rotary stage as the upper stage (pitch axis).

Motion Control Products- Miniature Direct Drive Linear Motor with Integrated Encoder and Temperature Sensor is Just 16 mm in Diameter!

Motion Control Products – Miniature Integrated Voice Coil Motor     Van Nuys, CA – Motion Control Products – Moticont is introducing their new miniature 16 mm diameter SDLM-016-032-01-01 Direct Drive Linear Motor with integrated position and temperature sensors. This smallest of the fully enclosed SDLM series of linear motors features zero backlash, zero cogging, […]

Motion Control Bearings – Adhesive Dispensing Rotary Bearing Assembly

Motion Control Bearings – Custom Assembly At LM76, we embrace challenges that push boundaries. While competitors stick to selling standard products, we thrive on designing and manufacturing unique, low-volume specials. Ready to take on the extraordinary? 

Motion Control – New! Three-axis Gimbal Mounts Feature High Resolution, High Load Capacity, Stability, and Four Motor Options!

Motion Control –  Three-Axis Stage!       Van Nuys, CA – — Motion Control – Four high resolution, high Load, high stability three axis gimbal mounts have been released by OES (Optimal Engineering Systems, Inc.). These four new AU270-YPR Three Axis (Yaw, Angular Pitch, and Roll) Gimbal Mounts were developed to be used with […]

Motion Control – New Mini Planetary Gearmotors from Applied Motion Products Available from Electromate!

Motion Control – Mini Planetary Gearmotors! Motion Control – Small, Cost effective Planetary Gearmotors Are Ideally Suited for Step Motor Applications Vaughan, Ontario, Canada — Motion Control  — Applied Motion Products New PH Series Mini Planetary Gearmotors are used with small step motors in NEMA 8, 11, and 14 frame sizes.  These gearmotors are used […]

Motion Control – XY-Theta Alignment Stages Feature: Sub Micron Resolution!

Motion Control –  XY-Theta Alignment Stages! Van Nuys, CA – — Motion Control – Two new XY-Theta Alignment Stages have been released by Optimal Engineering Systems, Inc. (OES). The XYR-15-60-01 and the XYR-15-60-04 Alignment Stages feature 15 mm (0.58 in.) of travel in both the X and Y axes and 360 degrees of continuous rotation […]

Powered by WordPress | Designed by: Free Premium WordPress Themes | Thanks to Free WP Themes, wordpress 4 themes and